Show simple item record

dc.contributor.authorGomez Casseres, Andrés Felipe
dc.contributor.authorContreras, Ruben
dc.date.accessioned2023-08-04T13:56:26Z
dc.date.available2023-08-04T13:56:26Z
dc.date.issued2018
dc.identifier.citationAPAspa
dc.identifier.urihttps://repositorio.cun.edu.co/handle/cun/4076
dc.description.abstractIn this paper, a bidirectional boost converter operated in Discontinuous Conduction Mode (DCM) is presented as a suitable power conditioning circuit for tuning of kinetic energy harvesters without the need of a battery. A nonlinear control scheme, composed by two linear controllers, is used to control the average value of the input current, enabling the synthesization of complex loads. The converter, along with the control system, is validated through SPICE simulations using the LTspice tool. The converter model and the controller transfer functions are derived. From the simulation results, it was found that the input current distortion increases with the introduced phase shift and that, such distortion, is almost entirely present at the zero-crossing point of the input voltage.eng
dc.format.extent5 paginasspa
dc.format.mimetypeapplication/pdfspa
dc.sourcehttps://publications.waset.org/10008411/batteryless-dcm-boost-converter-for-kinetic-energy-harvesting-applicationsspa
dc.subject.ddcTecnología (Ciencias aplicadas)spa
dc.titleBatteryless DCM Boost Converter for Kinetic Energy Harvesting Applicationseng
dc.typeArtículo de revistaspa
dc.contributor.researchgroupIDECUNspa
dc.relation.references[1] K. Tashiro, “Possibility of magnetic energy harvesting for zero-power sensor,” IEEJ Transactions on Fundamentals and Materials, vol. 137, no. 8, pp. 442–447, 2017.spa
dc.relation.references[2] G. Venkatesh, “Semiconductor solutions for the internet of things: The role of event detection, asynchronous design, energy harvesting and flexible electronics,” Journal of the Indian Institute of Science, vol. 93, no. 3, pp. 441–461, 2013.spa
dc.relation.references[3] A. Sanchez Ramirez, K. Das, R. Loendersloot, T. Tinga, and P. Havinga, “Wireless sensor network for helicopter rotor blade vibration monitoring: Requirements definition and technological aspects,” Key Engineering Materials, vol. 569, pp. 775–782, 2013. (Online). Available: http://doc.utwente.nl/87397/.spa
dc.relation.references[4] J. A. Bowden, S. G. Burrow, A. Cammarano, L. R. Clare, and P. D. Mitcheson, “Switched-Mode Load Impedance Synthesis to Parametrically Tune Electromagnetic Vibration Energy Harvesters,” IEEE-ASME Transactions on Mechatronics, vol. 20, no. 2, pp. 603–610, 2015.spa
dc.relation.references[5] A. R. M. Siddique, S. Mahmud, and B. Van Heyst, “A comprehensive review on vibration based micro power generators using electromagnetic and piezoelectric transducer mechanisms,” Energy Conversion and Management, vol. 106, pp. 728–747, 2015.spa
dc.relation.references[6] S. P. Beeby, L. Wang, D. Zhu, A. S. Weddell, G. V. Merrett, B. Stark, G. Szarka, and B. M. Al-Hashimi, “A comparison of power output from linear and nonlinear kinetic energy harvesters using real vibration data,” Smart Materials and Structures, vol. 22, no. 7, p. 075022, 2013.spa
dc.relation.references[7] S. G. Burrow and L. Penrose, “A 2 DOF vibration harvester for broadband and multifrequency harvesting using a single electro-magnetic transducer,” Journal of Physics: Conference Series, vol. 557, no. 1, p. 12031, 2014.spa
dc.relation.references[8] A. Cammarano, S. G. Burrow, D. A. W. Barton, A. Carrella, and L. R. Clare, “Tuning a resonant energy harvester using a generalized electrical load,” Smart Materials and Structures, vol. 19, no. 5, may 2010.spa
dc.relation.references[9] S. Saggini, S. Giro, F. Ongaro, and P. Mattavelli, “Implementation of reactive and resistive load matching for optimal energy harvesting from piezoelectric generators,” 2010 IEEE 12th Workshop on Controlspa
dc.relation.references[10] G. D. Szarka, B. H. Stark, and S. G. Burrow, “Review of Power Conditioning for Kinetic Energy Harvesting Systems,” IEEE Transactions on Power Electronics, vol. 27, no. 2, pp. 803–815, feb 2012.spa
dc.relation.references[11] J. Sun, D. M. Mitchell, M. F. Greuel, P. T. Krein, and R. M. Bass, “Averaged modeling of PWM converters operating in discontinuous conduction mode,” Power Electronics, IEEE Transactions on, vol. 16, no. 4, pp. 482–492, jul 2001.spa
dc.relation.references[12] J. B. Hoagg and D. S. Bernstein, “Nonminimum-phase zeros - Much to do about nothing,” IEEE Control Systems Magazine, vol. 27, no. 3, pp. 45–57, jun 2007.spa
dc.relation.references[13] C. Peters, J. Handwerker, D. Maurath, and Y. Manoli, “A Sub-500 mV Highly Efficient Active Rectifier for Energy Harvesting Applications,” IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 58, no. 7, pp. 1542–1550, jul 2011.spa
dc.relation.references[14] E. A. Gomez-Casseres, S. M. Arbulu, R. J. Franco, R. Contreras, and J. Martinez, “Comparison of passive rectifier circuits for energy harvesting applications,” in Canadian Conference on Electrical and Computer Engineering, vol. 2016-Octob, 2016.spa
dc.rights.accessrightsinfo:eu-repo/semantics/closedAccessspa
dc.subject.proposalAverage current control,eng
dc.subject.proposalboost convertereng
dc.subject.proposalelectrical tuningeng
dc.subject.proposalenergy harvestingeng
dc.type.coarhttp://purl.org/coar/resource_type/c_2df8fbb1spa
dc.type.coarversionhttp://purl.org/coar/version/c_ab4af688f83e57aaspa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
oaire.arwardurifile:///C:/Users/clara_leyton/Downloads/batteryless-dcm-boost-converter-for-kinetic-energy-harvesting-applications.pdfspa
dc.type.versioninfo:eu-repo/semantics/acceptedVersionspa
dc.rights.coarhttp://purl.org/coar/access_right/c_14cbspa


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record